Reverse Osmosis & Ultra Filtration

Home > Commercial Water Systems > Reverse Osmosis & Ultra Filtration

Australian Distributor of




Continental Water offer a range of Reverse Osmosis systems suitable for  drinking water in the home to large scale systems for small communities, mining and large industrial applications.

We have a range of specialised Reverse Osmosis systems for the health industry particularly Renal and CSSD applications where stringent Australian & New Zealand standards need to be maintained.

The Process

Reverse osmosis (RO)

Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove larger particles from drinking water.

What is Osmosis?

Osmosis is based upon the fundamental pursuit for balance. Two fluids containing different concentrations of dissolved solids that come in contact with each other will mix until the concentration is uniform. When these two fluids are separated by a semi permeable membrane (which lets the fluid flow through, while dissolved solids stay behind), the fluid containing the lower concentration will move through the membrane into the fluid containing the higher concentration of dissolved solids (Binnie e.a., 2002). After a while the water level will be higher on one side of the membrane. The difference in height is called the osmotic pressure.

What is Reverse Osmosis?

By applying a pressure that exceeds the osmotic pressure, the reverse effect occurs. Fluids are pressed back through the membrane, while dissolved solids stay behind.

To purify water by Reverse Osmosis membrane, the natural osmosis effect must be reversed. In order to force the water of the brine stream (high salt concentration) to flow towards the fresh stream (low salt concentration), the water must be pressurized at an operating pressure greater than the osmotic pressure. As a result, the brine side will get more concentrated.
The operating pressure of seawater is around 60 bar.

  1. Water flows from a column with a low dissolved solids content to a column with a high dissolved solids content
  2. Osmotic pressure is the pressure that is used to stop the water from flowing through the membrane, in order to create balance
  3. By pursuing pressure that exceeds the osmotic pressure, the water flow will be reversed; water flows from the column with a high dissolved solids content to the column with a low dissolved solids content

Reverse Osmosis is available as a stand alone system (and can be supplied as skid mounted or containerised for use a range of locations) and can form a central part of a specifically designed integrated system.


Call us on 1300 166 253 to see how we can help you.
Click here to download Our Products and Services Guide

Contact us if your existing System needs a health check-up?